Publicidad
Idiomas disponibles
Idiomas disponibles
Assemble the spray gun
WARNING! The threads on the lance and gun coupler can be easily cross threaded resulting
in an improper assembly. An improper assembly of the gun and lance can result in personal
injury. Do not use if the threads on the gun coupler and or lance are cross threaded.
Organize accessories
1.
Place the spray gun and lance
assembly into the gun holder.
2.
Push
the
rubber
grommets
dashboard. Note: the dashboard
label indicates correct nozzle
placement.
3.
Hang the high-pressure hose
using the adjustable strap.
Attempting to start the engine incorrectly or using the pressure washer incorrectly can
result in engine and/or pressure washer damage, and may cause serious injury or death.
To avoid these hazards, be sure to read, understand, and follow the steps outlined in the
OPERATING CHECKLIST section of the owner's manual before starting the engine, and
follow all the guidelines for proper use of the pressure washer.
Page 7
nozzles
into
the
on
the
WARNING:
WARNING:
1. Secure the lance to the gun by
carefully turning the coupler on the spray
gun until the coupler stops rotating. Do
not over tighten. Most of the threads on
the lance will not be visible if the lance
and gun are properly assembled. Be
careful not to cross-thread the gun and
lance.
3
OPERATING CHECKLIST
2
1
Publicidad
