Descargar Imprimir esta página

Brandt BFC8500X Manual De Instrucciones página 21

Publicidad

Idiomas disponibles

Idiomas disponibles

of units that are made of veneered wood can withstand tem-
peratures of at least 120 ºC. Plastics or glues that cannot with-
stand such temperatures will melt and deform the unit, once the
oven has been lodged inside the units, electrical parts must be
completely insulated. This is a legal safety requirement. All
guards must be firmly fixed into place so that it is impossible to
remove them without using special tools. Remove the back of
the kitchen unit to ensure an adequate current of air circulates
around the oven. The hob must have a rear gap of at least 45
mm.
When you have unpacked the oven, make
sure that it has not been damaged in any way.
If you have any doubts at all, do not use it:
contact a professionally qualified person.
Keep packing materials such as plastic bags,
polystyrene, or nails out of the reach of chil-
dren because these are dangerous to chil-
dren.
EN-6

Publicidad

loading