probst HVZ-LIGHT Instrucciones De Uso página 76

Maintenance and care
Packaging material, e.g. pallets must be stacked immediately and the stack should be moved outside the working
area.
Provide a transportable container for waste such as plastic sheet and straps.
Cut the tightening straps on both sides, almost at the bottom of the package, to avoid accidental clipping of the
straps using the laying installation clamp. If this happens the running bond is moved and must be corrected
manually.
Provide a transportable tipping container for damaged paving stones and stone waste, to avoid an expensive pick up
later on and hindrance in the movement of the laying machine.
A clean and tidy building ground saves time and money.
If there are problems with the laying technique, there should be a direct phone contact between the personal (driver
of the laying machine) and the manufacturer of the laying machine. So the consultant of the manufacturer is provided
with all the information he needs to diagnose and help.
7 Maintenance and care
7.1 Maintenance
To ensure the correct function, safety and service life of the device the following points must be
executed in the maintenance interval.
Used only original spare parts, otherwise the warranty expires.
All operations may only be made in unpressurised, electro less and closed state of the device!
For all operations you have to make sure, that the device will not close unintended.
Danger of injury!!!
51400035 31 / 35 GB