Sage Smart Tea Infuser BTM500 Guía Rápida página 8

Functions
BEFORE FIRST USE
In order to remove any dust or protective
residues from the manufacturing process,
it is recommended to run a boiling cycle then
discard the water.
1. Remove and safely discard any packing
material, promotional labels and tape from
the tea maker.
2. Lift the inner lid along with attached
tea basket.
Then remove the outer lid. Wash the outer lid,
tea basket, and inner lid in warm soapy water
with a soft sponge, rinse and dry thoroughly.
WARNING
Never immerse the base of the glass jug,
the power base, power cord or power plug in
water or allow moisture to come in contact
with these parts.
3. Place the power base on a flat, dry surface.
4. Unwind the power cord completely and
insert the power plug into a grounded
wall outlet.
8
WARNING
Never fill the glass jug with chilled water.
Allow the Sage Smart Tea Infuser
to cool before refilling.
WARNING
Filling past the MAX line may result in serious
burns or injuries as a result of overflowing hot
or boiling water. Filling below the MIN line will
result in the Sage Smart Tea Infuser
Compact switching off before the water has
boiled or reached the selected temperature.
5. Detach the tea basket from the inner lid by
pressing the button.
6. Without the tea basket in place, fill the
glass jug to the water MAX mark and
place on the power base. Securely fit
the lid onto the glass jug.
7. Select '100°C' in the temperature indicator
by pressing TEMP/KEEP WARM button
and turn off the timer by pressing STEEP
TIME button several times. Then press
START/CANCEL button to start.
8. Once the water reaches 100°C, it will
beep 3 times.
9. Discard the water. The Sage Smart Tea
Infuser Compact is now ready to use.
™
Compact
™
™