Speedcooking
WARNING
When using speedcook programs, remember that the oven, door and dishes will
be very hot!
Prior to the first use of your oven, the clock must be set. See the Clock section.
Before you begin, make sure the turntable is in place. Use the metal tray and your own glass or ceramic cookware, if
needed.
and PAUSE will appear in the display. Close the door
and press the START/PAUSE pad to resume cooking.
power levels by selecting EDIT.
Speedcook Power Level
Back
Help
Speed
Cook
Settings
Timer
On/Off
The Advantium uses power from high intensity halogen
lamps, a ceramic heater, a convection system and
microwaves to cook food from the top, bottom and
interior simultaneously to seal in moisture and flavor.
When using the pre-set menu foods, the power levels
are already selected for you. However, power levels can
be adjusted when using pre-set menu foods and MY
RECIPE.
12
The turntable must always be in
place when using the oven.
Start
Pause
Cancel
Off
Lock Controls
Hold 3 Sec
Micro
Convection
Bake
wave
Add
Options
30 Sec
Surface
Vent Fan
Light
been completed, use the Resume feature as instructed
on the display.
Put food directly on the metal tray or metal grill
tray to speedcook.
Each power level gives you halogen lamp or ceramic
heater power and microwave energy for a certain
percentage of the time or provides heating from the
convection system.
U–07 Upper halogen lamp and ceramic heater on 70%
of the time.
L–07 Lower ceramic heater on 70% of the time.
M–03 Microwave on 30% of the time.
NOTE: Be careful when adjusting power levels so that
you do not overcook or undercook food.
(follow instructions from Using the pre-set speedcook
menu).
2. When display shows EDIT, SAVE or START, turn the
dial to select EDIT.
If you do not want to change one of the settings, just
press the dial to move to the next selection.
3. Press the dial if you do not want to adjust cooking
time.
4. Turn the dial clockwise to increase or
counterclockwise to decrease the upper power level.
Press the dial to enter.
5. Turn the dial to change the lower power level. Press
the dial to enter.
6. Turn the dial to change the microwave power level.
Press the dial to enter.
7. Turn the dial to change the convection power level.
Press the dial to enter.
8. Press the Start/Pause pad or the selector dial to start
cooking.
49-7000136 Rev. 0