Miele PFD 400 Instrucciones De Manejo página 37

Add the cleaning agent to the dispenser.

Close the flap.

 Make sure that all of the cleaning
agent has dissolved at the end of the pro-
gramme.
Repeat the programme if residual clean-
ing agent is present.
Check whether any load items have pre-
vented the flushing out of the dispenser
container and rearrange the load items if
necessary.
en - Cleaning agent and rinsing agent
Tips for the Super Short programme (de-
pending on the model)
With the Super Short
rinse water is not pumped away at the end
of the programme in order to achieve short
programme running times in continuous
use.
Cleaning agent cannot be rinsed out of the
dispenser during the short programme time.
If liquid cleaning agent dispensing is not

being used, add powder cleaning agent
directly onto the inside of the door.
To avoid corrosion or discolouration, start
the wash programme immediately after
dispensing cleaning agent directly onto
the inside of the door.
Liquid cleaning agent is dispensed from an
external canister via a suction lance.
Depending on the model, liquid cleaning
agent is dispensed either via an internal dis-
pensing pump or via an external dispensing
module. Dispensing modules are connected
by the Miele Customer Service Department
and can be retrofitted at any time.
programme, the final
37