Black and Decker CTO6301BJP Manual Del Usuario página 6

QUiCk BakE FUNCtiONS
These functions allow you to cook at preset cooking temperatures and times, or can be
adjusted as desired.
Note: You can stop the cooking at any time by pressing the StaRt/StOP button.
COOkiES FUNCtiON (M)
Preset temperature: 350˚F.
Preset time: 12 minutes
Rack Position: 2 or 3 (refer to Figure D). Place in the center of the oven.
1. Press COOkiES button.
2. To change the temperature, immediately press ▲ or ▼ buttons.
Tap button and release to change in increments of 5 degrees.
Press and hold button to change in increments of 25 degrees.
3. To change the time, press the tiME button. Tap button and
release to change in one-minute increments. Press and hold
button to change in 10-minute increments.
4. Press StaRt/StOP button.
• digital display flashes PReHeAT until 150˚F temperature
is reached; temperature continues to increase until set
temperature is reached.
• once unit reaches set temperature, it beeps and display
alternates between temperature and time during the entire
cooking cycle.
M
• The time will count down in one-minute increments until it reaches 59 seconds,
then it counts down in one-second increments.
• At the end of the cooking cycle, the unit beeps 3 times and cooking stops.
5. open oven door using oven mitt or pot holder and carefully remove food.
Pizza FUNCtiON (N)
Preset temperature: 400˚F.
Preset time: 20 minutes
Rack Position: 2 or 3 (refer to Figure D)
1. Press Pizza button.
2. To change the temperature, immediately press ▲ or ▼ buttons.
Tap button and release to change in increments of 5 degrees.
Press and hold button to change in increments of 25 degrees.
3. To change the time, press the tiME button. Tap button and
release to change in one-minute increments. Press and hold
button to change in 10-minute increments.
4. Press StaRt/StOP button.
• digital display flashes PReHeAT until 150˚F temperature
is reached; temperature continues to increase until set
temperature is reached.
• once unit reaches set temperature, it beeps and display
alternates between temperature and time during the entire
N
cooking cycle.
0
• The time will count down in one-minute increments until it reaches 59 seconds,
then it counts down in one-second increments.
• At the end of the cooking cycle, the unit beeps 3 times and cooking stops.
5. open oven door using oven mitt or pot holder and carefully remove food.
FROzEN SNaCkS FUNCtiON (P)
Preset temperature: 400˚F.
Preset time: 6 minutes
Rack Position: 2 or 3 (refer to Figure D)
1. Press FROzEN SNaCkS button.
2. To change the temperature, immediately press ▲ or ▼
buttons. Tap button and release to change in increments of
5 degrees. Press and hold button to change in increments of
25 degrees.
3. To change the time, press the tiME button. Tap button and
release to change in one-minute increments. Press and hold
button to change in 10-minute increments.
4. Press StaRt/StOP button.
• digital display flashes PReHeAT until 150˚F temperature
is reached; temperature continues to increase until set
temperature is reached.
• once unit reaches set temperature, it beeps and display
alternates between temperature and time during the entire
P
cooking cycle.
• The time will count down in one-minute increments until it reaches 59 seconds,
then it counts down in one-second increments.
• At the end of the cooking cycle, the unit beeps 3 times and cooking stops.
5. open oven door using oven mitt or pot holder and carefully remove food.
POtatO FUNCtiON (Q)
Preset temperature: 400˚F.
Preset time: 45 minutes
Rack Position: 2 or 3 (refer to Figure D)
1. Press POtatO button.
2. To change the temperature, immediately press ▲ or ▼
buttons. Tap button and release to change in increments of
5 degrees. Press and hold button to change in increments of
25 degrees.
3. To change the time, press the tiME button. Tap button and
release to change in one-minute increments. Press and hold
button to change in 10-minute increments.
4. Press StaRt/StOP button.
• digital display flashes PReHeAT until 150˚F temperature
is reached; temperature continues to increase until set
temperature is reached.
Q