Publicidad
Idiomas disponibles
Idiomas disponibles
Open the tailgate and the step. Remove the 12 screws securing the tailgate protector and remove.
Remove the six bolts (not re-used) securing the step and rotate the step forward to rest on the tailgate.
Remove the rubber cap in the center of the tailgate indicated by the arrow and remove the 8mm nut.
Fig 1
Remove the two plastic cover panels. Some vehicles may be equipped with a light kit in each of the
panels. If equipped with lights, the lights will be reinstalled into the Kicker speaker baffle later. Fig 2
Note: Light kits (GM part number: 84347814)
can be purchased separately from any
GM dealership.
Remove the wire retainers indicated. Fig 3
Fig 1
Fig 2
Fig 3
2
Publicidad
