2. Make sure that the multi-function head is tilted down in the horizontal
working position and that the speed control knob is set to the OFF position.
Connect the power cord to a power socket.
3. Set the required speed using the speed control knob. Gradually turn the
speed control knob clockwise to increase the speed, turning it in the
opposite direction will reduce the speed. To initially stir in the ingredients, first
set a lower speed and then adjust it as required. Electronic speed regulation
ensures that the set speed will be maintained under various loads. While it is
running, ingredients may be added into the bowl through the hole in the
cover.
4. The pulse mode is used for increasing the speed to maximum for a short
time. To activate the pulse mode, turn the speed control knob to the P
(PULSE) position and to ensure continuous operation hold it down in this
position. As soon as you release the speed control knob, it will automatically
return to the OFF position.
5. If it is necessary to wipe ingredients off the inside of the mixing bowl and the
attachment, first turn off the food processor by setting the speed control
knob to the OFF position and then disconnect it from the power socket. Wait
until the rotating parts come to a stop and only then scrape away the
ingredients with a spatula.
6. After you have finished using the appliance, set the speed control knob to
the OFF position and disconnect the power cord from the power socket.
7. Wait until the rotating parts come to a stop and disassemble the food mixer
according to the instructions indicated above. Use a soft plastic spatula to
empty out the contents of the bowl.
8. Clean out the food processor after each use.
Quick Guide to Processing Ingredients
Attachment
type
Whisk
Whisk
Beater
Dough hook
Instructions for use
Ingredients
Egg whites
Whipping
cream
Cake dough
Bread or Pizza
dough
Maximum
Processing
load
12 pcs
1 l
2,2 l
0,8 l
English
Speed
time
selection
4 min
6-8 min
6 min
4-5 min
MIN to 2
5-6
5-6
3-4
7