Cherubini MODO RX Instrucciones página 31

+
B C
Tn
This system is the only one of its kind and it
guarantees that rolling shutters (which are equipped
with lockdown hangers) remain perfectly closed
without any danger of the slats suffering excessive
pressure. The system works in all kinds of applications
because of the opportunity of manually adjusting the
closing force.
The motor is factory set to a closing force of 20 % of the nominal torque. This force can
be changed very easily by the remote control. It can be reduced by 10 % or increased up
to 40 %, depending on the desired result.
MAXIMUM CLOSING FORCE ADJUSTMENT (100%)
A close attention on activating this function is recommended, excessive closing force may
damage the rolling shutters.
By activating this function the motor will apply its maximum nominal torque, (e.g. 100%
of 50 Nm = 50 Nm).
Tn: Already programmed remote control
+
B C
Tn
CLOSING FORCE ADJUSTMENT
A
A
40 %
20 %
10 %
31
A
B
C
2 sec
+
A C
2 sec