Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE CONNECTING THE APPLIANCE
Read these instructions carefully and keep them for later use.
Check that the voltage of your power outlet is 230 V ~ 50 Hz and that it is earthed.
The electrical safety of this appliance is guaranteed only if it is connected to a
socket with an effective earth connection, as established by current safety
standards.
The manufacturer declines any responsibility for the damages derived from the lack
of earth connection in the installation. If in doubt, consult a professional.
If you need to use an extension cord, use only an extension cord that is in good
condition, with an earthed plug, and that is suitable for the power of the appliance.
Do not leave the power cord under the microwave oven or let it come into contact
with hot surfaces.
After removing the packaging, check that the appliance is not damaged. If in doubt,
do not use it and contact technical support personnel.
Do not leave packaging materials such as plastic bags, Styrofoam, etc. within the
reach of children, as they are a potential source of danger.
The manufacturer declines any responsibility for damages resulting from
inappropriate, incorrect or imprudent use of the device.
PRECAUTIONS TO AVOID POTTENTIAL EXPOSURES
TO ENERGY EMISSIONS FROM THE MICROWAVE OVEN
Do not try to start the oven with the door open, do not force or manipulate the
safety lock system and do not insert any object into the door lock slots.
Do not place any objects between the front of the oven and the door.
Do not allow dirt or cleaning product residue to accumulate on the surfaces of the
security closures. Be sure to clean the door and closing areas after each use by
wiping with a damp cloth and then drying with a soft cloth.
Do not use the microwave oven if any of the following parts are damaged:
1. Door and zones of the closing system.
2. Hinges and latches (broken or loose).
3. Power cord.
Do not attempt to tamper with or make adjustments or repairs to the door, control
panel, safety lock system, or any other part of the oven. The repair and review must
be carried out by an Official Technical Service.
This signal warns that the area where it is located may acquire high
temperatures when the oven is used in grill mode. After using the
oven in this mode, do not touch this surface and wait for it to cool down.
VERY IMPORTANT!
4
Publicidad
