Publicidad
Idiomas disponibles
Idiomas disponibles
floor tool attached. Make sure there is no wiring in the wall within the envelope of the wall parking
mount.
2. Place the wall parking mount ⑯ to the selected location on the
wall and mark the holes to drill with the pencil. Drill the holes at
the market locations to fit the plugs. Next, drive in the plugs
flush and attach the wall parking mount with the screws ⑰ in-
cluded with the product —
3. Now, you can park and store the vacuum cleaner on the mount
.
Fig. 4
CLEANING AND MAINTENANCE
1. Clean the outer surface of the vacuum cleaner, the interior of the
dust canister and the accessories (tools) with a damp cloth. Next,
wipe them dry. Use a mild detergent to remove persistent dirt.
2. Empty the dust canister every time you finish vacuum cleaning.
Clean the EPA ⑦ and the filter cage ⑧ (which is also a coarse fil-
ter) every few times you empty the dust canister. See the assem-
bly and disassembly of the filter in "ASSEMBLY AND DISASSEM-
BLY". Wash the filter cage ⑧ in water and leave to dry. The EPA
filter ⑦ must be cleaned gently on the outside, with a soft brush.
CAUTION! Do not clean the EPA filter ⑦ wet!
3. Periodically clean the exhaust filter ⑩. It is accessed by removing
the exhaust filter cover ⑪. Open the exhaust filter cover by turn-
ing it a bit counter-clockwise. Remove the exhaust filter ⑩, flush
it clean with water, and leave until thoroughly dry. Replace the
exhaust filter. Close and secure the exhaust filter cover by turning
it a bit clockwise.
CAUTION! Do not install the exhaust filter ⑩ when wet! Dry it
completely before reassembly.
TECHNICAL SPECIFICATION
See the product's nameplate for technical specifications.
Power cord length: 7.00 m
Vacuum cleaner reach from the mains outlet: 8.40 m
CAUTION! MPM agd S.A. may change the technical features of the product without
Proper disposal of the product (waste electrical and electronic equipment)
Marking on the product indicates that after the service-life of the product expires, it should not be dis-
posed with other type of municipal waste. Used equipment may have a negative impact on the environ-
ment and health of people due to potentially containing hazardous substances, mixtures and components.
Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may
cause a release of substances that are hazardous to the environment and health. Used equipment should
be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the
electric waste collection points, the user should contact the municipal point of electric waste collection or used
equipment processing department.
.
Fig. 3
notice.
❸
❹
EN
19
Publicidad
