MPM MRK-12 Manual De Instrucciones página 25

ACCESSORIES STAND
As a standard equipment, the food processor KASIA type 116 has an accessory stand,
which makes it easier to store the appliance's attachments. The following attachments can
be placed on the stand: discs C, citrus squeezer D, spatula E, dough hook and metal cutter
F, egg whites whipper I.
CLEANING AND MAINTENANCE
Before cleaning the appliance always unplug it. Disassemble the attachments and ac-
cessories in the order reverse from that in which they were attached for their functions.
Wash all the attachments and accessories in water with a cleaning agent (preferably right
after use, which makes the cleaning process easier) and then dry them.
Never immerse the processing unit A in water or any other liquids. It should only be wiped
with a damp cloth.
ATTENTION! Pay attention when touching cutting blades, especially when removing them from
the container, emptying it and during cleaning.
NO OPERATION
- Check if the appliance is properly plugged in to the mains and if there is power in the socket.
- Check if the blender container B1, the blender lid B2 and the juice extractor lid H2, squeezer con-
tainer D2 or mixer jug G3 are properly assembled.
- If everything is properly assembled and attached,and the appliance still does not work, contact an
Authorised Service Centre to have the defect identified and rectified.
TECHNICAL DATA
Power supply: 230 V ~50 Hz
Maximum power: 800 W
Maximum rotation: 13100 rpm
Speed settings: 3 + PULSE function
Capacity of the blender container: 1.5 litre
Capacity of the mixer jug: 1.0 litre
KB MAX = 5 min
L = 75 dB
WA
NOTE! MPM agd S.A. reserves its right to modify the technical data.
Proper disposal of the product (waste electrical and electronic equipment)
Marking on the product indicates that after the service-life of the product expires, it should not be dis-
posed with other type of municipal waste. Used equipment may have a negative impact on the environ-
ment and health of people due to potentially containing hazardous substances, mixtures and components.
Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may
cause a release of substances that are hazardous to the environment and health. Used equipment should
be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the
electric waste collection points, the user should contact the municipal point of electric waste collection or used
equipment processing department.
EN
25