Publicidad
Idiomas disponibles
Idiomas disponibles
5450100-Schrauber-man
10 – Maintenance and
environmental
protection
Care of battery – „Memory effect"
When charging the battery, the so-called
„memory effect" should be taken into
account. For example, when recharging
a half-charged battery, the battery
remembers this stage as the final
charging stage for the next charging
operation. This is known as the
„memory effect". During the next
discharging operation (i.e. use of the
battery) the battery reminds the user of
this (reduced) capacity. When the
battery is then charged again after using
half the capacity, only a quarter of the
power is available before it is unusable.
To avoid the memory effect and
therefore conserve the capacity of the
battery, we recommend allowing the
battery to discharge completely (e.g. by
operating the screwdriver) approximately
every two months and then recharging
it. Only fully charged batteries should be
stored for any length of time. Check the
charge occasionally to ensure a
maximum life span of the battery.
CAUTION! Storing discharged
batteries may cause total
discharge. This causes irreparable
damage to the battery cells.
Clean the case only with a damp cloth –
Do not use solvents. Then dry well. The
place of storage must be dry; the
ambient temperature must not fall below
0 °C or rise above 40 °C.
38
11.10.2005 10:34 Uhr
Seite 38
CAUTION! Unusable power tools
do not belong with domestic
waste. They must be taken
to a communal collecting
point for environmentally
friendly disposal in
accordance with local
regulations.
11 – Service instructions
• Store the machine, operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all the
information and parts ready to hand.
• MeisterCRAFT devices are to a large
extent maintenancefree, a damp cloth
being sufficient to clean the casing.
Do not drop electrical machines in
water. Please note additional hints
given in the operating instructions.
• MeisterCRAFT devices are subject to
stringent quality control. If however a
functional fault shoult occur, send the
device to our servicing address. The
repairs will be carried out in a short
time.
• A brief description of the defect
speeds up the faulttracing and repair
time. If within the guarantee period,
please enclose the guarantee
document and the proof of purchase.
Publicidad
