Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
NOT stare into the laser light source. Never
aim light at another person or object other
than the workpiece. Laser light can damage
your eyes.
WARNING
serious injury.
Do not direct the laser beam at persons or animals and do
not stare into the laser beam yourself. This tool produces laser
class 2 laser radiation and complies with 21 CFR 1040.10 and
1040.11 except for deviations pursuant to Laser Notice No.
50, dated June 24, 2007. This can lead to persons being blinded.
Working
safely
measuring tool is possible only
when the operating and safety
information are read completely
and the instructions contained
therin are strictly followed.
Never make warning labels on
the
Measuring
unrecognizable.
Never aim the beam at a
workpiece with a reflective
surface. Bright shiny reflective
sheet steel or similar reflective
surfaces are not recommended for
laser use. Reflective surfaces
could direct the beam back toward
the operator.
Take care to recognize the
accuracy and range of the
device. Measurement may not
be accurate if used beyond the
rated range of the device.
General Safety Rules
LASER RADIATION. AVOID
DIRECT EYE EXPOSURE. DO
Read all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or
Safety Rules
with
the
Use of controls or adjustments
or performance of procedures
other than those specified
herein may result in hazardous
radiation exposure.
The use of optical instruments
with this product will increase
tool
eye hazards.
Have
repaired only through qualified
specialist using original spare
parts. This ensures that the safety
of
the
maintained.
Do not allow children to use the
measuring
supervision.
unintentionally blind other persons.
Do not point the laser beam at
persons or animals and do not
look
into
-7-
the
measuring
measuring
tool
They
the
laser
tool
tool
is
without
could
beam
Publicidad
