Garland 1480 QGW Manual De Instrucciones página 38

English
5.4.2.1 EMERGENCY STOP BUTTON
This machine has an emergency stop button for the
machine in case it is pressed. Please make sure that
the button is not pressed before starting the machine.
6.4.2.1. ELECTRIC AND MANUAL COLD START
A. Turn the engine switch with the ignition key in the
ON position.
PROTECTOR
A. Place the ON/OFF switch in the "ON" position.
B. Place the fuel tap in the open position.
C. Place the air lever in the Closed position
CIRCUIT
ON OFF
.
D. Place the accelerator lever in the maximum
position .
E1.Move the key to the START position.
E2.Or pull the starter handle until the engine starts
and gradually move the air lever to the OPEN position
(normal working position). Put the throttle lever in the
down position and allow the engine to warm up for 1
minute before starting work.
Normal working
position
Turtle = Minimum
Hare = Maximum
6.4.2.2. ELECTRIC AND MANUAL HOT START
Follow steps A and B of cold start. Move the throttle
lever to the middle position, then turn the key to the
START position or pull the starter grip until it starts.
6.4.2.3. ENGINE STOP
Turn the engine switch with the key in the OFF
position. If the shredder is to be stored, place the fuel
bypass lever in the OFF position.
6. MACHINE USAGE
Only use this machine for those jobs for which it
has been designed. The use of this machine for other
uses is dangerous and could cause damages to the
user and/or the machine.
38/148
Throttle level