Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION AND START-UP
INSTALLATION
1. Slide the transfer chair out of the box
2. Install the two rear wheel components onto the
main frame. Use the screws
that are already mounted on the main frame.
In standby mode (no indicator lights are on), press the up and down buttons simultaneously for 3 seconds to force a reset.
DMI-F-07_Annexe 2_Notice.2
3. Insert the left and right components of the seat/backrest
into the holes in the seat frame.
Secure them with the screws from below. Insert the
2 push handles into the seat/backrest components and
secure them with screws.
20
Publicidad
