EN
Outdoor Powerbank 8.0 (8.000 mAh)
2 Description and function
2.1 Product
The product is a mobile auxiliary battery and is used to
for charging and operating mobile devices. It has an in-
tegrated lithium-polymer battery that can be recharged
can be charged via USB power supply or via an integ-
rated solar panel.
In addition, the product can be used as a torch and has
a compass.
2.2 Scope of delivery
Outdoor Powerbank 8.0 (8.000 mAh), Charging cable,
User Manual
2.3 Operating Elements
See Fig. 1.
1 Carabiner
2 Solar panel
3 LED status indicator
4 Function button
5 Compass
6 Torch
3 Intended use
This product is intended exclusively for private use
and its intended purpose. This product is not intended
for commercial use. We do not permit using the de-
vice in other ways like described in chapter "Descrip-
tion or Function" and „Safety Instructions". Not atten-
ding to these regulations and safety instructions might
cause fatal accidents, injuries, and damages to persons
and property.
IP44: This product is protected against splash and con-
tact with foreign objects ≥ Ø1 mm.
4 Preparation
1. Check the scope of delivery for completeness and
integrity.
2. Compare the specifications of all used devices and
ensure compatibility.
5 Connection and operation
5.1 Activating the power bank
• Press the function button 1x to activate the pow-
er bank.
The power bank switches on automatically when you
connect a mobile device. The power bank switches off
automatically after a while if no mobile device is con-
nected.
5.2 Charging the power bank
The power bank is delivered partially charged. Fully
charge the power bank before using it for the first time.
1. Open the protective cap.
2. Connect the micro USB socket of the power bank to
a USB power source via the charging cable.
This can be either a 230 V USB charging adapter, a
12/24 V car USB charger or the USB socket of a PC.
3. Disconnect all cable connections after charging.
4. Close the protective cap.
REV2023-05-24
Subject to change without notice. |
V5.2aw
Sous réserve de modifications.
7 USB-A socket
8 Micro USB socket
9 Protective cap
10 USB-A plug
11 Micro USB plug
5.3 Charging the mobile device
1. Open the protective cap.
2. Connect your mobile device to one of the USB-A so-
ckets.
Your mobile device is charging.
It is not recommended to charge several mobile devi-
ces at the same time via the power bank.
3. Press the function button 1x each to start and end
the charging process.
4. Disconnect all cable connections after charging.
5. Close the protective cover.
5.4 Checking the charging status
See Fig. 2.
• Press the function button 1x to activate the pow-
er bank.
The charging status is indicated by the LED status in-
dicator.
If no LED lights up despite pressing the function key,
the power bank is completely empty. During the char-
ging process, the respective LED flashes to indicate
the current charging status. If there is sufficient suns-
hine, the power bank is also charged via the solar pa-
nel. The green LED then lights up.
5.5 Torch
See Fig. 3.
1. Press the function button 1x to activate the Pow-
erbank.
2. Press the function button 2x to switch the torch func-
tion on or off.
3. After switching on, press the function button 1x brief-
ly each time to select the other functions.
6 Maintenance, Care, Storage and
Transportation
NOTICE!
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Charge the batteries every three months to ensure
they maintain capacity when not in use for an exten-
ded period of time.
• Store the product out the reach of children and in a
dry and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.
7 Disposal instructions
7.1 Product
According to the European WEEE directive,
electrical and electronic equipment must not be
disposed with consumers waste. Its compo-
nents must be recycled or disposed apart from
each other. Otherwise contaminative and hazardous
substances can damage the health and pollute the en-
vironment. As a consumer, you are committed by law to
dispose electrical and electronic devices to the produ-
cer, the dealer, or public collecting points at the end of
the devices lifetime for free. Particulars are regulated in
national right. The symbol on the product, in the user
manual, or at the packaging alludes to these terms.
With this kind of waste separation, application, and
waste disposal of used devices you achieve an import-
ant share to environmental protection. WEEE No:
82898622
- 5 -
Pillmannstraße 12 | 38112 Braunschweig | Germany
49216
Material damage
Goobay® by Wentronic GmbH