Publicidad
STEP 13
With the pantry standing up,
attach the top glide stop to the
top of the floating back plate,
using (2) #8 x 1 deep thread flat
head screws in pre-drilled locations
(See Fig. 18).
STEP 14
The pantry is now ready to be
inserted into the cabinet. You will
need to lift the pantry and set the
slide rail onto the product member,
and push the pantry into the
cabinet to engage the slide (See
Fig. 19).
1
STEP 15
Carefully slide the pantry out of
the cabinet and secure the slide
rail to the product member. Using
an allen wrench, tighten the allen
screws that were loosened in step
3, making sure that the set screws
go trough the slotted holes in the
front of the slide rail (See Fig. 20).
Note: These set screws also
adjust the pantry left to right in
2
the cabinet.
STEP 16
Reinstall the (3) grey caps removed
in Step 2 (See Fig. 21).
4
6
Slide rail
Product member
3
b
a
Customer Service: 800-626-1126 | rev-a-shelf.com
FIG. 18
Top Glide Stop
#8 x 1 Deep Thread
Flat Head Screws
FIG. 19
Mounting plate
FIG. 20
Set screws
FIG. 21
b
a
Publicidad
