Publicidad
Idiomas disponibles
Idiomas disponibles
■ During installation and operation of the product, it is necessary to comply
with the following instructions:
1) The device must be installed by a skilled person, in strict compliance with the
connection diagrams.
2) Do not power on or connect the device if any part of it is damaged.
3) After installation, inaccessibility to the connection terminals without
appropriate tools must be guaranteed.
4) The device must be installed and activated in compliance with current electric
systems standards.
5) Before accessing the connection terminals, verify that the leads are not live.
6) In the electrical system of the building where the device must be installed, a
protection device from the overcurrents must be present.
7) The device performs actions of 1B type and is suitable for environments
with pollution degree 2 and overvoltage category III (EN 60730-1).
information to users pursuant to art. 14 of the directive
2012/19 / EU of the european parliament and of the council
of 4 july 2012 on waste electrical and electronic equipment (WEEE)
this means the product must not be included with
other general waste at the end of its working life.
The user must take the worn product to a sorted waste center,
or return it to the retailer when purchasing a new one.
Products for disposal can be consigned free of charge
(without any new purchase obligation) to retailers with a sales area
of at least 400 m
An efficient sorted waste collection for the environmentally friendly disposal
of the used device, or its subsequent recycling, helps avoid the potential negative effects
and encourages the re-use and/or recycling of the construction materials.
SAFETY WARNINGS
If the crossed-out bin symbol appears
on the equipment or packaging,
, if they measure less than 25 cm.
2
on the environment and people's health,
- 39 -
OB326900 Chronothermostat User Manual
Publicidad
