essentiel b EEXJ3 Instrucciones De Uso página 27

troubleshooting
Problem
The bowl is stuck and
will not come away
from the base.
The chute is not
opening.
The juicer does not
work.
Juice leaks over the
body.
The bowl moves
under the pressure.
Use reverse function 3-5 seconds. Then, push bowl upward
while turning.
Use reverse function 3-5 seconds. Repeat 2-3 times. Then,
push bowl upward while turning. Do not attempt to open by
force.
Make sure that the power cord is connected correctly.
Check that the chute is assembled correctly. If the chute
has not been locked in position correctly, the juicer will not
operate, for safety reasons. Check if the juicer is assembled
according to the directions in the manual.
If you insert too many ingredients in relation to the amount of
pulp to come out, the bowl may be slightly compressed and
the juice may come out from the gap. Do not put too many
ingredients by force and just put them gradually.
The motor may cause slight shaking. Depending on the
texture of the ingredients, there may be slight to more
pronounced shaking. This is a normal phenomenon that
occurs when the juicing screw is turning - it is not a
malfunction. Hard ingredients like carrot, potato, radish,
beet, etc., may cause more shaking than soft ingredients.
Solution
27
V.1.0
troubleshooting