Publicidad
Idiomas disponibles
Idiomas disponibles
Timer:
Menu
Operation of the device
1) Connect the power cord and press the power button, select the function button, or
memorized parameters using the menu number keys.
2) Select the time mode (no time setting / heating time/baking time).
3) Turn the light on or off (if needed).
4) Set a time reserve (if needed) to start work.
Error codes
1) Err1: Problem with the oven sensor.
2) Err9: The control board and the main board are not connected.
Protection against overheating
If the device's temperature reaches the safety limit, the power will be cut off and the device will shut
down to prevent overheating. Before restarting, it is recommended to cool down the device and
check it for visible damage.
3.4.
Cleaning and maintenance
a)
Pull the mains plug and let the unit cool down completely before cleaning, adjusting or replacing
accessories and when the unit is not in use.
b)
Use only non-corrosive cleaning agents for cleaning the surfaces.
c)
Only mild detergents designed for cleaning food contact surfaces may be used to clean the unit.
d)
After each cleaning, all parts should be thoroughly dried before the device is reused.
e)
Store the unit in a dry and cool place protected from moisture and direct sunlight.
f)
Do not spray the unit with a stream of water or immerse it in water.
g)
Make sure that no water enters through the ventilation openings in the casing.
h)
Clean the ventilation openings with a brush and compressed air.
i)
Perform regular inspections of the unit checking technical fitness and any damages.
j)
Use a soft, damp cloth for cleaning.
k)
Do not use sharp and/or metal objects (e.g. wire brush or metal spatula) as they may damage the surface
of the material from which the appliance is made.
l)
Do not clean the unit with acidic substances, medical agents, thinners, fuel, oils, or other chemicals. It
may cause damage to the device.
Disposal of used devices
• Indefinite time: Both indicators are off.
• Heating: When the temperature reaches the set parameter, a
buzzer will sound. Press the timer button to turn off the buzzer
and start counting down according to the set time.
• Baking time: Starts counting down immediately after the oven
starts.
Menu button from 0 to 9, is used to save and recall the set
temperature and time parameters. After selecting the menu
number, adjust the parameters (if necessary), and wait until the
display stops flashing, the menu will automatically save the
parameters.
Publicidad
