Scooty SCOOT160 Manual De Instrucciones página 13

Modes of assistance:
EN
The device has 5 assistance modes. The electric assistance system is
activated by 1 to 1.5 turns of the pedals. The higher the mode, the greater the
electric assistance.
Speeds :
The device is equipped with 8 speeds.
You should change to a smaller number as soon as the effort becomes
important. Conversely, to avoid the sensation of pedalling «in a vacuum», a
higher number should be selected.
Use the gear lever on the handlebars to change gears.
Lighting :
The lighting system is a safety feature of your bike, it must be obligatory on
your bike. Check that your lighting system is working and that your batteries
are charged before riding.
Doorbell :
A bell is installed on your handlebars. The bell is a safety device on your bike,
it must be obligatorily present on your handlebars.
Brakes :
The right-hand handle activates your rear brake.
The left handle activates the front brake.
3.2. UNPACKING AND ASSEMBLING THE DEVICE
To unpack the product, it is recommended to have a clear surface that is
large enough to unpack and prepare the device. Take the device out of its
packaging, making sure to not injure yourself or damage other products or
your surroundings. Have someone help you if the product is too heavy for you
to handle on your own (the weight of the device is indicated on the packaging).
An adult must unpack and assemble the device.
Mounting the pedals :
Use the R (right) and L (left) markings to identify them.
1. Mount the right pedal on the right crank arm. Tighten the pedal clockwise
using the wrench provided.
2. Then screw the left pedal onto the left crank arm counterclockwise.
13