Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Troubleshooting
Problem
The device cannot be
switched on.
The device switches off
automatically during
operation.
If the problem persists, contact the customer service listed on the last page.
16
Possible cause
The mains plug is not
correctly plugged in.
The socket has no power.
The device is defective.
The tilt protection has
triggered or is blocked.
The overheat protection
has triggered.
The tilt protection has
triggered.
Remedy
Check that the mains plug
fits properly.
Check the socket by
connecting a different
device to it.
Have the device repaired
by the manufacturer, their
customer service or a
similarly qualified person.
Make sure that the device
is set up in an upright
position on a level surface
and/or that the tilt
protection switch on the
bottom of the device can
move freely.
See section "Over heating
protection".
Make sure that the device
is set up in an upright
position on a level surface.
Publicidad
