Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Apply the power tool to the screw only when
it is switched off. Rotating tool inserts can slip off.
Guide the screw toward the screwdriving bit 1. The
screw is held in place by the magnet pull of the univer-
sal bit holder 9. Firmly push the tip of the screw into the
material to be screwed until the screwing-depth stop 4
faces against the workpiece.
Switch the machine on. The screw is screwed into the
material until the adjusted screw-in depth is reached.
The drive is disengaged and the tool holder no longer
rotates. Check the screw-in depth and readjust, if
required.
For unscrewing screws, set the rotational direction
switch 8 to left rotation and pull off the screwing-depth
stop 4 toward the front without turning the adjustment
sleeve.
Working with the screwing-depth stop 4 is also possi-
ble when adapting the screw-in depth.
Belt Clip
With the belt clip 5, the machine can be hung onto a
belt. The user has both hands free and the machine is
always at hand.
Maintenance and Service
Maintenance and Cleaning
Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep the
machine and ventilation slots clean.
If the machine should fail despite the care taken in man-
ufacturing and testing procedures, repair should be
carried out by an after-sales service centre for BTI
power tools.
In all correspondence and spare parts orders, please
always include the 7-digit order number given on the
nameplate of the machine.
2 609 932 572 • 22.6.07
WARNING! Important instructions for connecting
a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to the fol-
lowing code:
Do not connect the blue or brown wire to the earth ter-
minal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this power tool, it must be
disposed of safely.
Disposal
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According the European Guideline
2002/96/EC for Waste Electrical and
Electronic Equipment and its implemen-
tation into national right, power tools
that are no longer usable must be collected separately
and disposed of in an environmentally correct manner.
Subject to change without notice.
English–4
Publicidad
