Descargar Imprimir esta página

san ignacio 43822 Manual De Instrucciones página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

ො Disconnect the appliance from the power supply if it is left unattended and before as-
sembling, disassembling or cleaning.
ො Make sure all parts are correctly mounted before you switch on the appliance.
ො Never reach into the feeding tube with your fingers or an object while the appliance is
running. Only the pusher is to be used tor this purpose.
ො Do not remove the pulp container when the appliance is in operation.
ො Do not touch the small cutting blades at the base of the filter.
ො The water temperature should not be over 60ºC when cleaning the unit.
ො Do not run this unit for a long time, otherwise the inner parts will be damaged.
ො Do not put the whole or parts of body into water.
ො Care shall be taken when handling the sharp cutting blades, emptying the bowl and
during cleaning.
ො Do not use the appliance if the rotating sieve is damaged.
ො Switch off the appliance and disconnect from supply before changing accessories or ap-
proaching parts that move in use.
2. HOW TO USE
PARTS
1. Measuring cap
2. Lid
3. Glass cup
4. Blades base
5. Stirring cup base
6. Body
BEFORE FIRST USE
• Thoroughly clean the parts
that come into contact with
food before you use the appli-
ance for the first time.
• Always place the motor unit
on a level surface.

Publicidad

loading