san ignacio 43822 Manual De Instrucciones página 7

USING
1. Check the switch knob is on the"0" position.
2. Put the cup on to the motor base, and button clockwise
3. Place the food you wish to process into the cup.
3. Put the lid on the cup and close securely. Place the measuring cap into the hole in the
lid.
4. Switch on the motor base.
Speed settings
1: (Low) for light usage with liquids
2: (High) for more solid consistency – for mixing liquids and solid foodstuffs
0: for stopping operation
P: (Pulse) short, powerful impulse movements
* The switch does not permanently engage in the" P " setting. You have to hold the switch
in the "P" setting or push it repeatedly.
* Operate the motor for a maximum of 2 minute or alternating 2 minute on, then 2 min-
ute off to prevent overheating or consequent damage.
Crushed ice function
Place 4 to 6 ice cubes in the jar. If you use too many cubes you will never get a satisfactory
result.
Place the lid on the blender, then turn the control knob to P speed (Pulse) 3 or 4 times,
with short pauses in between.
3. MAINTENANCE & CLEANING
• The appliance is easier to clean immediately after use.
• Do not use abrasive cleaning agents, scourers, acetone, alcohol, etc. to clean the
appliance.
1.Switch the appliance off, remove the plug from the wall socket and wait until the
blades has stopped running.
2.Turn counter-clockwise the cup to loosen it.
3.Clean these parts with a cleaning brush in warm water with some washing-up liquid
and rinse them under the tap.