Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE FIRST USE
• The iron may give off some smoke when you use it for the first time. This is normal and
it will stop after a short while.
• White particles may come out of the soleplate (E) when you use the iron for the first
time. This is normal; the particles are harmless and will stop coming out of the iron
after a short while.
• When you switch the appliance on, the steam station may produce a pumping sound.
This is normal; the sound tells you that water is being pumped into the boiler.
1. Remove any sticker or protective foil from the soleplate (E) and clean the soleplate (E)
with a soft cloth.
2. Place the steam station on a stable and level surface, i.e. on the ironing board or on
a table.
FILLING WATER
• If the tap water in your area is very hard, we recommend you to use distilled or de-
mineralised water.
• Do not put perfume, vinegar, starch, descaling agents, ironing aids, other chemicals or
100 percent distilled water in the detachable tank (M).
• Pull down the detachable water tank locker (O).
• Remove the detachable water tank (M) from the steam station.
• Fill the detachable water tank with water up to the MAX indication.
• Pull down the detachable water tank locker(O).
• Slide the detachable water tank (M) back into the steam station.
• The detachable water tank (M) can be refilled at any time during use.
• When the minimum level in the detachable water tank (M) has been reached, the wa-
ter indicator light will extinguish (F), so steam ironing will not be possible.
Note: when you use the appliance for the first time, a lot of water will be pumped from
the detachable water tank into the steam station. Refill the tank, if necessary.
SETTING THE TEMPERATURE
1. Check the garment label for the required ironing temperature:
●
Synthetic fabrics (e.g. acryl,viscose,polyamide) and silk
● ●
Wool
● ● ●
Cotton
MAX
Linen
Publicidad
