AENO RC4S Guia De Inicio Rapido página 10

ENG Robot vacuum cleaner AENO ARC0004S is a household device designed
for automatic cleaning of premises.
Specifications
Robot vacuum cleaner. Input parameters: voltage 19 V (DC), current 1.0 A, power
19.0 W. Battery: non-removable lithium-ion; 14.4 V (DC), 5200 mA·h. Power of the
vacuum cleaner: 20,0 W. Charging time: about 4.5 h. Operating time after a full
charge: up to 250 min. Suction power: up to 4 kPa. Number of suction modes: 4.
2
Cleaning area: ≤ 300 m . Type of cleaning: dry, wet. Container: dust tank – 300 ml.,
water tank – 300 ml. Number of water supply levels: 3. Maximum height of the
obstacle to be overcome: 20 mm. Noise level: ≤ 68 dB. Control: mechanical, through
the app and voice assistants. Emitting power: +17 dBm / 50.1 mW. Type of plug: C. Size:
Ø 350 mm., height 98 mm. Power cable length: 1.2 m. Operating conditions:
temperature 0...+45 °C, humidity ≤ 90 % (non-condensing). Storage conditions:
temperature 0...+70 °C, humidity ≤ 90 % (non-condensing).
Charging base (with combined self-cleaning station). Input parameters:
voltage 200–240 V (AC), frequency 50/60 Hz, power 1000.0 W. Noise level:
≤ 75 dB. Automatic dust canister volume: 3 l. Size (L×W×H): 280×193×320 mm.
The supply package (Fig. A)
Robot vacuum cleaner AENO ARC0004S (1), charging base with combined self-
cleaning station (2), dust bag (3) (3 pcs.), container (4), fabric cover module (5), fabric
cover (6) (2 pcs.), side brush (7) (2 pcs.), HEPA filter (8) (2 pcs.), pre-filter (9) (1 pc.), power
cord (10), vacuum cleaner care brush (11), short user manual, warranty card.
Safe use guidelines
Please read this document carefully before using the device. The vacuum cleaner is
intended for domestic use only. Do not use the vacuum cleaner outdoors. The cleaner
is not designed to pick up building dust and debris, flammable and/or volatile
substances, smoking and/or burning materials, or sharp objects. Before operating the
device, make sure that the rated voltage and frequency indicated in the technical
documentation correspond to the parameters of the mains supply. Charge the device
for at least 5.5 hours before using it for the first time. Use only the originaland
manufacturer-recommended battery, charging base, accessories, consumables
aeno.com/documents 10