Descargar Imprimir esta página

MELICONI TLC01 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
MELICONI - TLC01 remote control
EN
for instant use on
SAMSUNG television sets
Thank you for choosing a Meliconi remote control.
Keep this booklet for future reference
The TLC01 remote control is compatible with a SAMSUNG television set.
After inserting the batteries the remote control is ready to use, without any setup re-
quired.
The remote control has a non-volatile memory, meaning that it does not lose its settings even
if there are no batteries in it
SAFETY WARNINGS
Do not expose the remote control to sources of excessive heat or fi re.
This product is not a toy; keep away from children and pet's reach
INSERTING THE BATTERIES
The remote control requires 2 new 1.5V alkaline AAA/LR03
batteries. Not supplied. Insert them with the correct polarity, as
shown in the picture.
DO NOT use rechargeable batteries.
BATTERY TEST: Keep pressed the ON/OFF [
] button and
check that the indicator light remains on continuously until the
button is released. If the light fl ashes of remains off, the battery
charge is low; replace them.
Do not leave fl at batteries inserted, as liquid may leak and damage the remote
control
BUTTON AND FUNCTION VIEW
For a complete overview of the functions available on the TLC01 remote control, refer to the
two drawings on the coverlet fl ap.
The functions of the buttons shown in the fi gure are available only if they are also present
on the original device
Some of the functions of the original remote control may not be present on the BASIC keypad
of the MELICONI remote control.
Some functions are available by pressing the [SHIFT] button and pressing the button corre-
sponding to the desired function, shown in the right fi gure.
For example, to enable the CONTENT function, keep pressed the [SHIFT] button, then press
the EXIT button aiming the remote control toward the device.
6

Publicidad

loading