Publicidad
Idiomas disponibles
Idiomas disponibles
11. HOW TO ERASE THE LAST LOGGED FILE
When the log mode is on and a measurement has been
taken but the operator feels that the measurement
was an error measurement, it is possible to erase this
measurement. This is done to prevent faulty log files
on your computer.
If the measurement is not satisfying:
1.
From the main menu, scroll by turning the
encoder button, to the "CLEAR LOG"menu.
2.
The log value will be deleted permanently.
Sparklike Handheld™ log data can be downloaded
to your computer. In order to do this, Sparklike
Handheld™has to open its communication port to
your computer This is performed before enabling the
connection from the computer.
12. HOW TO TURN OFF THE LOG MODE
1.
From the main menu scroll, by turning the encoder
button, to the LOG ON/OFF menu.
2.
Select this by pressing the encoder button once.
3.
A screen will display that the log mode has been
turned off.
4.
When measuring, a text is displayed that the
measurements have not been logged.
5.
To create a new log file with a new name, repeat
procedure explained in chapter 10.
NOTE:
When Sparklike Handheld™ is connected
to a computer and the log files have been
retrieved, the log memory will be deleted from
Sparklike Handheld™device. This is the only way
of emptying the memory and should be done
every now and then to prevent the memory from
overfilling.
10
Publicidad
