sparklike HANDHELD 3.0 Manual De Instrucciones página 5

4. HOW TO USE ENCODER BUTTON
Press down to:
1.
Enter MENU
2. Confirm a selection
5. FACTORS TO CONSIDER WHEN MEASURING
Factors affecting the optics:
▶ Coloured glass
▶ Tinted glass (minimal effect)
▶ Strong background light measurement
(against the sun or other source)
▶ Dirt on the glass (minimal effect)
▶ Dirt on the front optical fibre
▶ Mistreated front optical fibre or electrode
Factors making it easier for the spark to
"jump":
▶ High argon fills
▶ Thin glass (6mm or less)
▶ Thin air space (20mm or less)
▶ Metallic or other conductor on surface 3, such
as low-e coating
▶ Metallic spacer bar
Turn to:
3.
Scroll in the MENU
4. Name a log file
Factors affecting the spark:
▶ Thick glass (over 6 mm)
▶ Plastic films on glass 1 (laminated glass,
coatings, etc.)
▶ Metallic films on glass 1
▶ Metallic components in glass 1
▶ Low Argon fill (less than 90%)
▶ Wide spacer (over 15mm)
▶ Electrode is not in contact with the glass
surface
▶ Sparklike Handheld is not evenly pressed
against the glass
▶ Non-metallic spacers
Correct conditions:
▶ Stable dark background light
▶ The device NOT moved during measurement
5