Publicidad
Idiomas disponibles
Idiomas disponibles
4.
SLEEP touch
SLEEP
You can use this touch for activating the "sleep"mode.
When pressing the "sleep" touch, the selected temperature will be elevated with 1 °C after 30 min. After
another 30 min the temperature will increase with another 1°C. The air conditioning will maintain this
temperature for 7 hours. After this time, the air conditioning will go back to the original set temperature
and the "sleep" function will end.
NOTE: this function cannot be selected with the "fan" or "dry" function.
5.
TEMP touch
Use these touches to select the temperature. The temperature can be set between 17°C and 30°C. When
pressing both buttons at the same time you can switch between "°C" or "°F".
SHORT
6.
SHORT CUT touch
CUT
With this button you can fix and switch on a preferential setting.
See the section titled 'Set functions > shortcut'.
Remote LED Screen Indicators
TIMER
7.
TIMER ON touch
ON
With this function you can select when the unit must turn on.
Transmission Indicator
See the section titled 'Set functions > timer on'.
Lights up when remote sends
signal to unit
TIMER
ON/OFF display
8.
TIMER OFF touch
OFF
MODE display
Appears when the unit is turned on,
With this function you can select when the unit must turn off.
Displays the current
and disappears when it is turned off
Remote LED Screen Indicators
mode, including:
See the section titled 'Set functions > timer off'.
AUTO
COOL
DRY
9.
LED
LED touch
Transmission Indicator
HEAT
Lights up when remote sends
This button turns off the control panel's LED display. This can be used if the display gives too much light
FAN
signal to unit
when you want to sleep. If you press the button a second time, the display will switch on again.
ON/OFF display
MODE display
Appears when the unit is turned on,
Displays the current
and disappears when it is turned off
SET FUNCTIONS
mode, including:
AUTO
AUTO
COOL
DRY
In the AUTO function, the apparatus automatically chooses the right setting depending on the chosen
HEAT
FAN
temperature. This setting can also be chosen with the remote control.
1.
Choose AUTO with the MODE button on the remote control.
2.
Set the desired temperature with the TEMP button. The apparatus will determine the setting
accordingly.
You cannot adapt the speed of the ventilation (FAN) in AUTO modus.
COOL
With the COOL function you can cool the room up to a certain temperature.
FAN SPEED display
1.
Press the MODE button until the COOL indicator lamp is on.
Displays selected FAN SPEED:
HIGH,
MED,
2.
Use the "+" and "-" buttons on the control panel or the TEMP button on the remote control to
or
LOW
set the desired room temperature.
This display is blank when
set to AUTO speed.
3.
Use the FAN button on the remote control to set the desired ventilation speed. There are three
settings: LOW
FAN SPEED display
Displays selected FAN SPEED:
HIGH,
MED,
or
LOW
48
This display is blank when
set to AUTO speed.
DO10140
Remote LED Screen Indicators
Remote LED Screen Indicators
Transmission Indicator
Lights up when remote sends
signal to unit
MODE display
Displays the current
MODE display
mode, including:
Displays the current
mode, including:
AUTO
COOL
AUTO
COOL
DRY
DRY
HEAT
HEAT
FAN
FAN
TIMER OFF display
TIMER ON display
Displays when TIMER
Displays when TIMER
OFF is set
ON is set
TIMER OFF display
TIMER ON display
Displays when TIMER
Displays when TIMER
OFF is set
ON is set
SILENT display
Not available for this unit
FAN SPEED display
Displays selected FAN SPEED:
FAN SPEED display
Temperature/Timer display
Displays the set temperature by default, or timer setting
Displays selected FAN SPEED:
HIGH,
when using TIMER ON/OFF functions
or
LOW
Temperature range: 17-30 C(62 F-86 F)
, HIGH
Timer setting range: 0-24 hours
or
LOW
This display is blank when
SILENT display
This display is blank when operating in FAN mode.
set to AUTO speed.
This display is blank when
Not available for this unit
5 5
set to AUTO speed.
Temperature/Timer display
Displays the set temperature by default, or timer setting
when using TIMER ON/OFF functions
Temperature range: 17-30 C(62 F-86 F)
Transmission Indicator
Lights up when remote sends
signal to unit
ON/OFF display
ON/OFF display
Appears when the unit is turned on,
and disappears when it is turned off
Appears when the unit is turned on,
and disappears when it is turned off
TIMER ON display
Displays when TIMER
ON is set
ECO display
Not available for
this unit
Battery display
Low battery
detection
SLEEP display
Displays when
SLEEP function
ECO display
is activated
Not available for
this unit
FOLLOW ME
display
Battery display
Indicates that
Low battery
the FOLLOW ME
detection
function is on
SLEEP display
Not available for
Displays when
this unit
SLEEP function
is activated
FOLLOW ME
display
Indicates that
the FOLLOW ME
MED,
function is on
HIGH,
MED,
o
O
O
Not available for
and AUTO.
this unit
o
O
O
TIMER ON display
How To Use The Basic Fun
Displays when TIMER
ON is set
How To Use The Basic Func
3
ON/OFF
1
MODE
SLEEP
3
ON/OFF
1
MODE
FAN
ION
SLEEP
COOL operation
1. Press the MODE button to select
COOL mode.
2. Set your desired temperature usin
the Temp
3. Press the FAN button to select the
fan speed: AUTO, LOW, MED,or
HIGH.
SILENT display
4. Press the ON/OFF button to start
unit.
COOL operation
SILENT display
Not available for this unit
Not available for this
1. Press the MODE button to select
COOL mode.
2. Set your desired temperature usin
the Temp
Temperature/Timer display
3. Press the FAN button to select the
fan speed: AUTO, LOW, MED,or
Temperature/Timer disp
Displays the set temperature by defa
HIGH.
Displays the set tempera
when using TIMER ON/OFF function
4. Press the ON/OFF button to start t
unit.
when using TIMER ON/O
Temperature range: 17-30 C(62 F
Temperature range: 17
Timer setting range: 0-24 hours
Timer setting range: 0
TIMER OFF d
TI
Displays whe
OFF is set
Di
O
2
SHORT
CUT
TIMER
ON
TEMP
TIMER
FAN
OFF
ION
FOLLOW
SWING
LED
ME
2
SHORT
CUT
TIMER
ON
TEMP
TIMER
OFF
FOLLOW
SWING
LED
ME
or Temp
button.
or Temp
button.
o
O
Publicidad
