Publicidad
Idiomas disponibles
Idiomas disponibles
Insert the core drill tool with the attached mounting plate into the drilling stand
and lock it with the turnstile (see page16).
For the operation of the core drill tool, the operationing instructions and
the safety rules have to be strictly observed!
Changing the drill bit
Warning!
The tool is heavy and may heat up during operation or during sharpening.
You could burn, cut, tear or squash your hands on the segments.
Therefore always wear protective gloves when changing tools.
Before working on the equipment pull the power plug from the socket!
Move the tool mount with the attached core drill tool upwards until it locks
in the final position.
Operations
In order to operate the tool safely, please observe the following notes:
Details of the work area
!
Keep the work area free of everything which could obstruct operations.
!
Provide for adequate illumination of the work area.
!
Adhere to the regulations concerning the power connection.
!
Lay the power cable in such a way that any damage by the drill can be
avoided.
!
Make sure to always keep the work area in view and to be able to reach
all necessary operating elements and safety installations.
!
Keep other persons away from your work area in order to avoid acci-
dents.
Space requirements for operating and maintenance
Whenever possible, keep a free space for operating and maintenance of about 2
m around the drill position, so that you can work safely and have immediate
access in case of a malfunction.
17
Publicidad
