cecotec BONGO S+ MAX INFINITY Serie Manual De Instrucciones página 39

ENGLISH
- Check that all parts of the electric scooter are in position and securely fastened.
- Check tyre wear and pressure.
- Check the brakes and throttle cables for wear.
7. TROUBLESHOOTING
Error Possible causes
The motor does not The battery is not connected.
operate
Low battery.
Electrical problem.
The motor turns off Overheating
during operation.
After charging it, the The battery is not fully charged.
electric scooter switches
off.
The battery is frozen.
The battery is old or not working
properly.
Battery does not charge The charger is broken.
The connector does not make good
contact.
Error codes: If any of the following error codes appear on the display, stop using the electric
scooter immediately and contact Cecotec's official Technical Support Service.
- E1: Motor fault
- E2: Controller-indicator fault
76
Possible solutions
Check the connectors.
Charge the battery
Check all connectors.
Release the throttle
and wait until the motor
cools down.
Charge the battery
Heat up the battery.
Replace the battery.
Replace the charger.
Replace the charger.
ORIGINAL MANUAL TRANSLATION
- E3: Throttle fault
- E4: MOS-controller fault
- E5: Phase-current fault
- E6: Average-current fault
- E7: Battery-voltage fault
- E8: Handlebar-brake fault
8. TECHNICAL SPECIFICATIONS
Model Bongo Cecotec Serie S+ Max Infinity/Unlimited
Reference 07304/07305
Features Measuring units
Dimensions Folded
Unfolded
Infinity's weight Electric scooter weight
Unlimited weight Electric scooter weight
Use requirements Min-max weight
Min-max height
Age bracket
Technical Infinity's autonomy
specifications
Unlimited's autonomy
Max. speed
Max. inclination
Operating temperature
Storage temperature
IP protection rating
Motor Max. power
Rated power
ENGLISH
Specifications
110x50x50
110 x 50 x 117 cm (1)
15,5 kg
16 kg
20-100 kg
190-130 cm
16-80 years (2)
Up to 30 km (3)
Up to 40 km (3)
25 km/h
15º
0º/45ºC
-15º/45ºC
IPX4
0,750 KW
0,350 KW
BONGO SERIE S+ MAX INFINITY / UNLIMITED 77