gala gar SMART MIG 350 MPV1 Manual Técnico De Instrucciones página 19

SMART MIG 350 MPV1
1. SAFETY.
Welding may cause damage to you and others. Please take good protection during welding. Please refer to the
operator safety guidelines in conformity with the accident prevention requirements of the manufacturer for more
details.
Gala Gar, S.L. c/ Jaime Ferrán, 19 (Políg. Cogullada) | Tel.: (+34) 976 47 34 10 - 50014 ZARAGOZA |
Only qualified personnel can operate this machine!
Please use welding protection appliances approved by

national safety supervision department.
All operators must be licensed and valid special

operating personnel for metal welding & cutting jobs.
Please cut off power supply while maintaining.

Electric shock-may result in serious injury or even death!
·Install grounding device according to application

standard.
Do not touch live parts with naked skin, wet gloves or wet

clothes.
Be sure you are insulated from ground and work piece.

Make sure all your working conditions are safe

Fume and gases can be dangerous!
Keep your head away from fumes and gases while in

welding.
Please use enough ventilation or exhaust to keep fumes

and gases away from the breathing zone.
Arc rays can burn!
Use suitable shield and clothing to protect your eyes and

body.
Protect other nearby personnel with suitable, non-

flammable screening from being injured.
Improper operation may cause fire or explosion.
Welding spark may cause fire. Please make ensure there

are no inflammables in welding area, and always be
alert to fire safety.
Make sure there is fire extinguisher readily available and

welders are well trained to operate the fire extinguisher.
Do not weld air-tight container.

Do not use this machine for pipe unfreezing

Weld materials can burn.
Do not contact hot workpiece with bare hands.

Cool the welding torch after continuously working.

19/69
www.galagar.com