Aquona GLACE Manual De Instrucciones página 22

12. GUARANTEE
END USER GUARANTEE:
The distributor guarantees this equipment for a period of five years
against any fault found, and in accordance with the provisions of RD
(Royal Decree) 1/2007 of the 16th of November (Amended text of the
General Law for the Protection of Consumers and Users).
This guarantee encompasses reparaion and replacement of defective
parts by personnel authorised by the distributor or by the Official
Technical Assistance Service (SAT), either at the location of installation or
at their respective workshops. Labour and shipping costs incurred by said
repairs are included in the guarantee.
IF/PEU/PAM will not be liable to honour the warranty in the event of parts,
which are subject to general wear and tear, lack of due maintenance,
damage or other incidents due to the consequence of misuse or inappro-
priate use in accordance with conditions, and functional limits of said
equipment as indicated by the manufacturer. Furthermore, the warranty
will be rendered invalid in the event of poor use or in the event of said
equipment being modified or repaired by personnel not authorised by
the distributor or by the official SAT. Replacement parts under warranty
shall remain the property of IF/PEU/PAM*. IF/PEU/PAM* shall be held
responsible for any lack of conformity of equipment in relation to its
origin, identity or appropriateness of the products, in accordance with
equipment type and end use.Taking into account the equipment's
characteristics, in order for the warranty to cover any lack of conformity,
the adherence to the installation and working technical conditions which
appear in this warranty is essential, as well as the submission of either a
sales invoice or receipt.
Failure to comply with said conditions my invalidate this warranty, taking
into account the relevance of the equipment's aim and conditions and
working limits.
The distributor guarantees that the installed equipment is appropriate for
the improvement of the quality of the water to be treated, in accordance
with the equipment's characteristics and current legislation.
The installation personnel and/or distributor guarantees the correct
installation and initial operation of the equipment in accordance with the
manufacturer's instructions and any current legislation, and will be
responsible for any lack of conformity which arises from any incorrect
application, installation or initial operation of said equipment.
For any warranty claim the submission of the sales receipt is required. The
5-year period is calculated from the date the equipment is purchased from
the distributor.
If during the warranty period the equipment encounters any issues please
contact your local distributor.
In the event of equipment installation, where the water to be treated has a
hardness in excess of 25ºF, IF/PEU/PAM*
shall not be held responsible for any equipment breakdown, poor working
or any associated consequences caused by the water's characteristics.
* IF/PEU/PAM = IONFILTER/PURICOM EUROPE/
PURICOM AMÉRICA
IDENTIFICATION OF THE SYSTEM:
S/O
P/N
S/N
22
User Manual
The equipment has been installed and
is working in a satisfactory manner for
the client and for the record:
*RO equipment prior treatment:
*RO equipment entry hardness [ºF]:
*RO equipment entry TDS [ppm]:
*RO equipment entry pressure [bar]:
*TDS produced water (tap) [ppm]:
*Installation and initial operation
service result sheet
CORRECT.
OTHER INFORMATION:
The equipment's owners have been suitably
and clearly informed of the use and
maintenance required to ensure its correct
working and of the quality of water to be
produced. To these effects a maintenance
contract is offered.
*Ref. Maintenance contract
The maintenance contract IS ACCEPTED.
The maintenance contract is NOT
ACCEPTED.
In the event of needing further information, to
report a breakdown or fault, please request
either maintenance or technical assistance.
Please read the sections relating to troubles-
hooting in this manual and contact the
distributor or retailer.
COMPANY AND/OR AUTHORISED
INSTALLER: (date and signature)
NOTES FOR THE COMPANY/AUTHORISED
TECHNICIAN/INSTALLER:
Information marked with an (*) should be filled in by
the installation technician.
TECHNICAL ASSISTANCE LINE