Fonexion ideus ITDECTBB10 Manual De Usuario página 22

ITDECTBB10
2
INSTALLATION
Plug the main power lead into the bottom of the base unit.
Plug the main adapter into mains socket with the switch on the socket set to off.
Switch on main power at the socket.
Fit the batteries in the handset
Powering up the handset, press and hold key
* The power adapter is the disconnect device for this equipment, the socket-outlet shall be near
the equipment and easily accessible.
* Batteries must be charged through the base at first time at least 12 hours non-stop in order to
increase their lifetime and obtain an optimal performance.
* All passwords are set by default "0000".
3 MENU SETTINGS
During standby mode, press the OK key to enter the menu setting, those are five "sub-menus"
under the handset menu item PHONE BK, CALL LOG, BS SET, HS SET and REGISTER.
Press UP/DOWN keys to select the above menu entries.
Press OK key to enter or accept the related configuration.
Press "hang up" key to quit the setting state, or press "PHONE BK" key to exit to the
previous state of the menu.
Menu tree as follows.
PHONE BK:
- List
- New entry
- Edit record
- Del record
- Delete all
- Mem status
HS SET:
- Alarm - Call barring
- Ring setting - Time and Date
- Tone setting - LCD contrast
- Language - Select Base
- HS name - Default PIN
- Auto-answering
22
EN
CALL LOG:
Missed
Received
Dialed
BS SETTINGS:
- Delete HS
- Dial mode
- Flash time
- Modify pin
- BS default
REGISTRATION:
- Base1 (2,3,4)
USER GUIDE