Steren HER-429 Manual De Instrucciones página 26

Volume
To measure the volume three measurements are
necessary:
De ne the width, length and height of the space to be
measured. Then follow these steps:
1. Press twice. The icon
2. Press to measure the rst side (width). The icon
will change to
3. Press to measure the second side (long). The icon
will change to
4. Press to measure the third side (height).
The icon will change to
The meter will automatically calculate the volume,
based on these 3 measurements.
Indirect measurement (Pythagorean theorem)
This meter is able to calculate distances based on the Pythagorean theorem. This
function is ideal for measuring some di cult or inaccessible areas.
The results obtained are only correct if exactly the right angles speci ed in the
respective measurements are maintained.
1. Press three times
2. Press to measure the hypotenuse (a)
3. Press again to measure the leg (b)
Automatically you will get the measure of the leg (c),
based on these 2 measurements.
will appear on the screen.
a
c
b
. On the screen the icon
Functioning
1.719
1.283
0.494
3
0.400
1.086
1.009
11