Makita DGA504RT3J Manual De Instrucciones página 6

ENGLISH (Original instructions)
1. Button
2. Red indicator
3. Battery cartridge
4. Slide switch
5. Indicator lamps
6. Check button
7. Battery indicator
8. Mode indicator
9. Shaft lock
10. Wheel guard
11. Bearing box
12. Screw
13. Lever
14. Lock nut
15. Depressed center wheel
SPECIFICATIONS
Wheel diameter
Max. wheel thickness
Rated speed (n)/No load speed (n
Overall length
With battery cartridge BL1830, BL1830B,
BL1840, BL1840B, BL1850, BL1850B,
Net weight
With battery cartridge BL1830, BL1830B,
BL1840, BL1840B, BL1850, BL1850B,
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
6
Explanation of general view
16. Inner flange
17. Lock nut wrench
18. Ezynut
19. Abrasive wheel
20. Spindle
21. Arrow
22. Notch
23. Flex wheel
24. Back up pad
25. Sanding lock nut
26. Abrasive disc
27. Rubber pad
28. Abrasive cut-off wheel/diamond
wheel
Model
Spindle thread
0
With battery cartridge
BL1815N, BL1820, BL1820B
BL1860B
With battery cartridge
BL1815N, BL1820, BL1820B
BL1860B
Rated voltage
DGA404
100 mm (4")
6.4 mm (1/4")
M10
)
2.2 kg
2.4 kg
CORDLESS GRINDER SAFETY
ENE048-1
WARNINGS
Safety Warnings Common for Grinding, Sanding,
Wire Brushing, or Abrasive Cutting-Off Operations:
1. This power tool is intended to function as a
GEA010-1
grinder, sander, wire brush or cut-off tool. Read all
safety warnings, instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
2. Operations such as polishing are not
recommended to be performed with this power
tool. Operations for which the power tool was not
designed may create a hazard and cause personal
injury.
3. Do not use accessories which are not specifically
designed and recommended by the tool
manufacturer. Just because the accessory can be
29. Wheel guard for abrasive cut-off
wheel/diamond wheel
30. Abrasive cut-off wheel
(Thinner than 4 mm (5/32"))
31. Abrasive cut-off wheel
(4 mm (5/32") or thicker)
32. Diamond wheel
(Thinner than 4 mm (5/32"))
33. Diamond wheel
(4 mm (5/32") or thicker)
34. Wire cup brush
35. Wire wheel brush
36. Exhaust vent
37. Inhalation vent
38. Dust cover
DGA454
115 mm (4-1/2")
6.4 mm (1/4")
M14 or 5/8" (country specific)
-1
8,500 min
348 mm
362 mm
2.3 kg
2.5 kg
D.C. 18 V
DGA504
125 mm (5")
6.4 mm (1/4")
2.3 kg
2.5 kg
GEB059-4