Optional Accessories - Makita DTM40 Manual De Instrucciones

MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and the bat-
tery cartridge is removed before attempting to perform
inspection or maintenance.
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Segment saw blade
• Round saw blade
• Plunge cut saw blade
• Scraper (rigid)
• Scraper (flexible)
• Serrated seg blade
• General joint cutter
• HM remover
• HM seg saw blade
• HM sanding plate
• Diamond seg sawblade
• Sanding pad
• Adapter
• Abrasive paper delta (red / white / black)
• Fleece delta (medium / coarse / without grit)
• Polishing felt delta
• Hex wrench
• Dust extraction attachment
• Makita genuine battery and charger
NOTE:
• Some items in the list may be included in the tool pack-
age as standard accessories. They may differ from
country to country.
Noise
The typical A-weighted noise level determined according
to EN62841:
Work mode: Sanding
Sound pressure level (L
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with plunge cut saw blade
Model DTM40
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model DTM50
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
ENG905-1
): 78 dB (A)
pA
): 82 dB (A)
pA
): 93 dB (A)
WA
): 84 dB (A)
pA
): 95 dB (A)
WA
Work mode: Cutting with segmential saw blade
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Work mode: Scraping
Model DTM40
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model DTM50
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
NOTE:
• The declared noise emission value(s) has been mea-
sured in accordance with a standard test method and
may be used for comparing one tool with another.
• The declared noise emission value(s) may also be
used in a preliminary assessment of exposure.
WARNING:
• Wear ear protection.
• The noise emission during actual use of the power
tool can differ from the declared value(s) depend-
ing on the ways in which the tool is used especially
what kind of workpiece is processed.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of expo-
sure in the actual conditions of use (taking account
of all parts of the operating cycle such as the times
when the tool is switched off and when it is running
idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN62841:
Work mode: Sanding
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: Cutting with plunge cut saw blade
Model DTM40
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model DTM50
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: Cutting with segmential saw blade
Model DTM40
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model DTM50
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: Scraping
Model DTM40
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model DTM50
Vibration emission (a
Uncertainty (K): 1.5 m/s
): 81 dB (A)
pA
): 92 dB (A)
WA
): 81 dB (A)
pA
): 92 dB (A)
WA
): 83 dB (A)
pA
): 94 dB (A)
WA
ENG907-1
ENG900-1
2
or less
): 2.5 m/s
h
2
2
): 9.5 m/s
h
2
2
): 10.0 m/s
h
2
2
): 5.0 m/s
h
2
2
): 5.5 m/s
h
2
2
): 7.5 m/s
h
2
2
): 9.5 m/s
h
2
9