ABB ACS580-04 Guía Rápida De Instalación Y Puesta En Marcha página 14

14 EN – Quick installation and start-up instructions
Step Task
4 Option +B051: Put the conductors of the input cables through the drilled holes in
the clear plastic shroud.
5 Connect the input power cable conductors to the L1/U1, L2/V1 and L3/W1 connec-
tion busbars.
6 Option +B051: Move the clear plastic shroud along the input cables to its final po-
sition. Install the front clear plastic shroud.
7 Install the upper front cover.
8 Remove the cardboard protective covering from the drive module air outlet.
9 Option +B051: Cut a hole in the side clear plastic shroud for the cable entry clear
EN
plastic shroud. Install the side and top shrouds to the drive module.
DA
Default I/O connection diagram
DE
The default I/O connections of the ABB Standard macro are shown below.
ES
FI
FR
IT
NL
PL
PT
SV
TR
ZH
Figure
S
T
U
V