Descargar Imprimir esta página

GreenWorks DHF410 Manual Del Operador página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any
other condition that may affect its operation. A guard
or other part that is damaged should be properly
repaired or replaced by an authorized service center
unless indicated elsewhere in this manual.
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
• Use appliances only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminal together may cause
burns or a fire.
• Do not use a battery pack or appliance that
is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior
resulting in fire, explosion or risk of injury.
• Do not expose a battery pack or appliance to
fire or excessive temperature. Exposure to fire or
temperature above 130°C may cause explosion.
The temperature of 130°C can be replaced by the
temperature of 265°F.
• Follow all charging instructions and do not charge
the battery pack or appliance outside of the
temperature range specified in the instructions.
Charging improperly or at temperatures outside of
the specified range may damage the battery and
increase the risk of fire.
• Have servicing performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product is
maintained.
• Do not modify or attempt to repair the appliance or
the battery pack (as applicable) except as indicated
in the instructions for use and care.
• Any other service should be performed by an
authorized service representative.
• Only use the correct tine cylinder that matches
the application. Using any other tine cylinder or
attachment may increase the risk of injury.
• Keep hands away from blades.
• Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to battery
pack, picking up or carrying the appliance. Carrying
the appliance with your finger on the switch or
energizing appliance that have the switch on invites
accidents.
• Disconnect the battery pack from the appliance
before making any adjustments, changing
accessories, or storing appliance. Such preventive
English
safety measures reduce the risk of starting the
appliance accidentally.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns. (This advice is considered correct for
conventional NiMh, NiCd, lead acid and lithium-ion
cell types. If this advice is incorrect for a cell design
that differs from these, then the correct advice may
be substituted.)
2.1
SYMBOLS ON THE PRODUCT
Some of the following symbols may be used on this
product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to
operate the product better and safer.
Sym-
Name
bol
V
Volt
A
Amperes
Hz
Hertz
W
Watt
min
Minutes
/min
Per Minute
Alternating
Current
Direct Cur-
rent
No Load
n o
Speed
Safety Alert
Eye Protec-
tion
WARNING
--- Wet Con-
ditions
5
Explanation
Voltage
Current
Frequency (cycles per sec-
ond)
Power
Time
Revolutions, strokes, sur-
face speed, orbits etc., per
minute
Type of current
Type or a characteristic of
current
Rotational speed, at no
load
Precautions that involve
your safety.
Always wear eye protection
with side shields marked
to comply with ANSI Z87.1
when operating this equip-
ment.
Do not expose the product
to rain or moist conditions.
EN

Publicidad

loading