Polk Audio LC65FX Manual Del Propietário página 2

ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves,or other apparatus
(including amplifiers) that produce heat.
9. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, liquid has been spilled or
objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
10. WARNING: To reduce the risk of fire or electric shock,
this apparatus should not be exposed to rain or
moisture and objects filled with liquids, such as
vases, should not be placed on this apparatus.
Product Disposal—Certain international, national
and/or local laws and/or regulations may apply
regarding the disposal of this product. For further
detailed information, please contact the retailer
where you purchased this product or the Polk Audio
Importer/Distributor in your country. A listing of
Polk Audio Importer/Distributors can be found on
the Polk Audio website www.polkaudio.com or
by contacting Polk Audio at 5601 Metro Drive,
Baltimore, Maryland 21215, USA—
Phone: +1 410 358-3600.
WARNING: LISTEN CAREFULLY
Polk Audio loudspeakers and subwoofers are capable
of playing at extremely high volume levels, which
could cause serious or permanent hearing damage.
Polk Audio, Inc. accepts no liability for hearing loss,
bodily injury or property damage resulting from the
misuse of its products.
Keep these guidelines in mind and always use your
own good judgment when controlling volume:
• You should limit prolonged exposure to volumes
that exceed 85 decibels(dB).
For more about safe volume levels, go to www.polkaudio.com/
education/article/SPL/, or refer to the Occupational Health
and Safety Administration (OSHA) guidelines at
http://www.osha.gov/dts/osta/otm/noise/standards_more.html
2
Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com
All manuals and user guides at all-guides.com
TAKE INVENTORY
Inside each speaker container,
you should find the following:
1. Two LC65 or Two LC80
FX FX
2. Two speaker mounting templates
3. Two paint masks
4. Two perforated aluminum grilles
5. LC65 /LC80 Manual
FX FX
6. Registration Card
Important Note: If anything is missing or damaged, or if
your speaker fails to operate, notify Polk Audio Customer
Support Services immediately at 800-377-7655.
Installation is easy as 1-2-3: cut one hole, feed the
wires, and simply drop the speaker in. Rotating Cams
secure the speaker safely with no extra assembly
or mess.
Get more information and exclusive accessories, visit
www.polkaudio.com
INSTALLATION RECOMMENDATION
FOR OPTIMUM PERFORMANCE
Important Note: You should have a thorough under-
standing of and adhere to all local building and fire
codes. Also, you should be familiar with the area
behind the wall or ceiling into which you plan to install
your speakers. Always use wire that meets appropriate
building and fire codes. Use at least 14 gauge wire
or heavier for the best sound quality. (Note: Wiring
is best performed by an experienced professional.)
When installing your LC i Series In-wall Loudspeakers,
be aware of the weight of your particular model (see
specification page for the weight of your model) and
the sturdiness of the material into which you are
installing the speaker. Be aware of any concealed
studs, electrical wiring or plumbing in the wall or
ceiling into which you are installing the speakers.
If you doubt that you possess the necessary skills
or tools, consult your Polk Audio dealer or a
professional installer.
If you are using a performance enclosure, please
refer to the performance enclosure installation
instructions included with the enclosure.
WIRE RECOMMENDATIONS
Runs
Lengths up to 25'
speakers
Lengths greater than 25'
but less than 50'
Lengths greater than 50'
but less than 75'
Lengths greater than 75'
LC65
INSTALLATION
You will need:
• Pencil for marking the location
of installation.
• Keyhole saw, utility knife or material-appropriate
tool for cutting drywall or other wall material.
• Level.
• Screwdriver, preferably powered,
with Phillips Head bit.
• Power drill with appropriate bit
(optional, for starting wall cut).
LC80
LC65
Gauge
18 or 16
16 or 14
14 or 12
12
/LC80 LOUDSPEAKER
FX FX
FX
Trace around
the template.
Cut the hole with
the appropriate tool.
FX
Trace around
the template.
Cut the hole with
the appropriate tool.