Brandt BOH1325X Manual De Usuario página 125

removed the same way as the second glass
layer.
Removal of the Oven Door
Before cleaning the oven door glass, you
must remove the oven door, as shown
below.
1. Open the oven door.
2. Open the locking catch (a) (with the aid
of a screwdriver) up to the end position.
a
3. Close the door until it is almost in the
fully closed position, and remove the door
by pulling it towards you.
Removal of the Wire Shelf
To remove the wire rack, pull the wire rack
as shown in the figure. After releasing it
from the clips (a), lift it up.
5.2 maintenance
WARNING: The maintenance of this
appliance should be carried out by an
authorised service person or qualified
technician only.
Changing the Oven Lamp
WARNING: Switch off the appliance
and allow it to cool before cleaning
your appliance.
• Remove the glass lens, then remove the
bulb.
• Insert the new bulb (resistant to 300 °C)
to replace the bulb that you removed
(230 V, 15-25 Watt, Type E14).
• Replace the glass lens, and your oven
is ready for use.
• The product contains a light source of
energy efficiency class G.
• Light source can not be replaced by end
user. After sales service is needed.
• The included light source is not intended
for use in other applications.
Replaceable light source by a
The lamp is designed specifically for
use in household cooking appliances.
It is not suitable for household room
illumination.
•
EN - 22
a
professional