Publicidad
Idiomas disponibles
Idiomas disponibles
Turn the device on with the lower toggle switch on the handle.
Select an air stream level on the handle (lower switch):
Position 0:
Position I:
Position II:
Setting the Temperature level (upper switch ):
Position :
Position :
Position :
Cool SHoT (Cold Air)
Hold the button down in this position according to the desired
interval length. When the button is released it returned automati-
cally to the initial position.
Switch-off
After use, turn the lower switch to be "0" position and remove the
mains plug.
Storage
•
Leave the device to cool before putting it away!
•
Hang the device up by the suspension eye.
mains Cable
•
The mains cable should only be wound up loosely.
•
Never tie the cable tightly round the device, as over time this
may result in the cable breaking.
•
Check the mains cable regularly for damage.
Cleaning and care
WARNING:
•
Before cleaning remove the mains lead from the socket.
•
Under no circumstances should you immerse the device
in water for cleaning purposes. Otherwise this might result
in an electric shock or fire.
CAUTIoN:
•
Do not use a wire brush or any abrasive items.
•
Do not use any acidic or abrasive detergents.
Clean the housing with a soft, dry cloth without additives.
Air Intake Grill
•
Please clean the grill on the air intake side of the hairdryer
regularly in order to avoid excessive temperatures as a
result of heat accumulation.
•
Remove any dirt that is present. If necessary, a fine brush
can be used.
16
05-HTD 843 CB.indd 16
Use
off
gentle stream of air
strong stream of air
low temperature
medium temperature for
gentle drying and shaping.
high temperature for rapid
drying.
With this switch you can
stop the heating process.
Noise development
The sound pressure level in the ear of an operator (LpA) was
measured according to DIN EN ISO 3744.
Sound pressure level detected: 79 dB(A) (no limit)
Technical Data
Model: ........................................................................HTD 843 CB
Power supply: ............................................................230 V, 50 Hz
Power consumption: ..........................................................2000 W
Protection class: .......................................................................... ΙΙ
Net weight: ........................................................................0,46 kg
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of reutilisa-
tion of electrical and electronic equipment.
Information concerning where the equipment can be disposed of
can be obtained from your local authority.
11.02.2010 10:24:49 Uhr
Publicidad
