ASSEMBLY INSTRUCTIONS
16. Attach temperature gauge (X) and temperature
gauge nut bezel (Z) to lid and firebox assembly
(B) using pre-assembled nut.
17. Attach lid handle assembly (C) to lid and firebox
assembly (B) using two M6x12 bolts (AA).
Hardware Used
M6x12 Bolt
AA
18. Thread crank handle (F) into lid and firebox
assembly (B). Secure with one cotter pin (FF).
Hardware Used
Cotter Pin
16
Z
x 2
18
x 1
F
11
X
B
B
FF