Publicidad
Idiomas disponibles
Idiomas disponibles
Power tool use and care
. Do not force the power tool. Use
correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
. Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is
dangerous and must be repaired.
. Disconnect the plug from the
power source and/or remove the
battery pack, if detachable, from
the power tool before making any
adjustments, changing
accessories, or storing power
tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
. Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with power
tool or these instructions to
operate the power tool. Power
tools are dangerous in the hands of
untrained users.
. Maintain power tools and
accessories. Check for
misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect power tool's operation. If
damaged, have the power tool
repaired before use. Many
accidents are caused by poorly
maintained power tools.
. Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
. Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working
conditions and the work to be
performed. Use of the power tool
for operations different from those
intended could result in a hazardous
situation.
. Keep handles and grasping
surfaces dry, clean and free from
oil and grease. Slippery handles
and grasping surfaces do not allow
for safe handling and control of the
tool in unexpected situations.
Battery tool use and care
. Recharge only with the battery
charger specified by the
manufacturer. A charger that is
suitable for one type of battery pack
may create a risk of fire when used
with another battery pack.
. Use power tools only with
specifically designated battery
packs. Use of any other battery
packs may create a risk of injury and
fire.
. When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal to
another. Shorting battery terminals
together may cause burns or fire.
. Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact
accidentally occurs, flush with
water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
. Do not use a battery pack or tool
that is damaged or modified.
Damaged or modified batteries may
exhibit unpredictable behaviour
resulting in fire, explosion or risk of
injury.
. Do not expose a battery pack or
tool to fire or excessive
temperature. Exposure to fire or
temperature above °C may
cause explosion. NOTE the
temperature " °C" may be
replaced by temperature " °F".
. Follow all charging instructions
and do not charge the battery
pack or tool outside the
temperature range specified in the
instructions. Charging improperly
or at temperatures outside the
specified range may damage the
battery and increase the risk of fire.
Service
. Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
. Never service damaged battery
packs. Service of battery packs
should only be performed by the
manufacturer or authorized service
providers.
Safety of others
This appliance is not intended for use by
persons with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of
the appliance by a person responsible for
their safety.
Children should be supervised to ensure
that they do not play with the appliance.
Publicidad
