Publicidad
Idiomas disponibles
Idiomas disponibles
1. INTRODUCTION
13. DIGIT (0-9) KEYS
To select channel number directly.
To select 0-9 digits, A-Z(or a-z) letters, common marks
and punctuation marks when write data or information to
be stored in notebook.
PICTURE BUTTON
14.
Cyclically selects the 4 picture settings:
Mild-Standard-Dynamic-Personal
15. CHANNEL UP/DOWN BUTTON
To cyclically select the channel number.
To select the item in menu systems.
1.3.2 INSTALLATION OF BATTERIES
1. Open the battery compartment cover.
2. Install two R06 (size AA) batteries in correct
direction.
3. Close the battery cover.
1.3.3
EFFECTIVELY USING THE
REMOTE CONTROL
SENSOR
16.
VOLUME UP/DOWN BUTTON
To decrease or increase the volume level.
To activate the selections in the menu
system, or to change audio and video
settings.
17.
SOUND EFFECT BUTTON
To switch between the 4 sound effect settings:
Concert, Broadcast, Personal ,Theatre.
MTS BUTTON
18.
To select the sound modes cyclically:
Mono, Stereo, SAP and Mono+SAP .
MENU BUTTON
19.
Press to display the main menu. Also goes
back to the previous screen menu or exits
the menu from screen.
NOTES:
• The life time of the batteries may last up to
one year, depending on how often the
remote control is used. For the best
performance,
replaced on a yearly basis, or when remote
operation becomes erratic.
• Be sure to place the batteries in the correct
direction, as shown left.
• Do not mix old and new batteries,
different types.
• Old batteries
damage the remote control. Always remove
batteries as soon as they become weak.
Point the remote toward the infra-red remote
sensor on the main unit as shown left.
NOTES:
If direct sunlight, incandescent light, or any
other strong light sources hit the remote
control sensor, the remote control may not
operate properly.
If there is an obstacle between the main
unit and the remote control, the remote
control signal may not be received.
R06 (SIZE AA) batteries should be used.
8
the batteries
should be
may leak chemical and
or
Publicidad
