spalina BT-65105 Instrucciones página 11

PROBLEMS
Water Pump Failure
Air Pump Failure
No water jet
(the water pump
is intact)
Failure to control the
water strength
The bathtub is uneven
Water pipe leakage
Side panel installation
failure
Control panel failure
CAUSE
Disconnection with power supply;
disconnection of the leakage
protector
Electricity supply is abnormal
The control box is broken
The pump impeller is blocked by
rubbish
The water pump is broken
The control panel is broken
Disconnection with power supply;
disconnection of the leakage
protector
Electricity supply is abnormal
The control box is broken
The pump impeller is blocked by
rubbish
The air pump is broken
The control panel is broken
The pump impeller is broken
The water circulation is jammed or
leaks
Abnormal voltage
The water circulation is jammed
The screws of the foot stand are not
well placed
Seal failure
Screw unlocked
Joint disconnected
Adjust the panels of each side to fit the screw holes
The bathtub is disconnected from
the control box
Control panel failure
The control panel is broken
SUGGESTIONS
Reconnect the bathtub with
power supply; reconnect the
leakage protector
Inspect electricity supply
Change it
Clean the pump
Repair or change it
Change it
Reconnect the bathtub with
power supply; reconnect the
leakage protector
Inspect electricity supply
Change it
Clean the pump
Repair or change it
Change it
Change it
Clean the water circulation
system or repair the leakage
Inspect the voltage
Clean the water circulation
system
Adjust the screws
Change it
Lock it
Reconnect it
Reconnect the bathtub to the
control box
Repair or change it
Change it
11